Product Information
This T-300K junction rectifier component module full color controller runs at DC 5/12/24V victimization associate aboard transformer, thirty two 65536 grade grey level support code Gamma correction. Support the principles and special-shaped handle. eight ports output one port will support 512-1024 lamp pixels. On-line (also will Mount Rushmore State Card) management, offline management will be multiple controllers utilizes in combination, the contents of the road management program keep within the Mount Rushmore State card. Compatible LED strip with single line or T-300K double line chips. If the controller to the lamps distance will select physical phenomenon isolated transmission and as so much as many distances of up to 200-300 M. Using the. inbuilt lightning resistant and ESD protection circuit, make sure the safe and reliable.
junction rectifier Edit 2014 code you'll be able to even transfer video to be born-again and dead across junction rectifier strips. Support all the varied rules-shape, special form process. conjointly includes a 2GB Mount Rushmore State card with preloaded LPD6803 TM1812 WS2801/2811/2812B/UCS1903 effects to induce you started. Off-line use, will most support enjoying sixteen program that store within the Mount Rushmore State card.
T-300K System options
1). Support the foundations and special-shaped handle.
2). Eight-port output, each port will support 512-1024 pixels, easy lay support 8192 pixels
3). Off-line(SD Card) management, replay content keep within the SD card.
4). T-300K store a most of sixteen programs, copy multiple files to the SD card so as, once format the SD card as “FAT” format.
5). The program should be named in orders . even as 00_1.led, 01_1.led, 02_1.led.
6). Compatible with single and twin IC, if you management one line IC light-emitting diode lights, while not being connected to the CLK line.
NOTE:
1). The T-300 K managementer offline control, every machine controller should place a SD card.
2). once T-300K managementer control but 512 lamps the frame rate will reach 30fps. once T-300k management quite 512 lamps and fewer than 1024 lamps the frame rate can block mechanically.
3). 2012 Edition T-300K controller will solely be combined with the remake software system LED edit 2012 . exploitation the previous software system doesn't support the remake of the controller; the remake of the controller has been print the Chinese sign
4). If the space between controller and lamps quite 50m, we advise exploitation differential signal transmission management or physical phenomenon isolated signal transmission management,please browse the manual rigorously. Signal lines should be a cable,the best is Super 5 styles of cable.
5). Application Scope: light-emitting diode digital tube, light-emitting diode purpose lightweight sources exterior lightweight and a module picture element screen (dazzle color screens) high power D MX lighting.
6). offline management please use T-300K online/offline controllers
Click here to transfer on-line management package Ledplayer 2014
Trouble Shooting
Question 1: controller once electrify, indicator light-weight is traditional, however the lamps no impact modification Answer: the explanations for this area unit the following:
(1) Please check lamps signal and controller have correct affiliation.
(2) If it's meet TTL signal, lamps and lanterns and controller should altogether, particularly the lamps G ND (ground) to the G ND and controller (ground) got along.
(3) Please check the impact file of Mount Rushmore State card ,the selected models whether or not current lamps and used the chip consistent.
Question 2: after power, the T-300k ERROR indicator has been flashing while not show output
Answer: the ERROR indicator has been flashing suggests that the controller didn't scan the cardboard properly, attainable problems:
Mount Rushmore State card is empty, with no impact file.
The impact come in the Mount Rushmore State card and therefore the controller model aren't match, please opt for correct controller model in LED edit and so re-create the impact file *led.
Mount Rushmore State card didn't format to FAT before copy impact files.
Please check the provision power voltage, the controller may be on an individual basis supercharged to exclude power reasons.
dynamical the Mount Rushmore State card and so check to exclude the chance of a nasty Mount Rushmore State card.
Safety
provide voltage of this product is 5/12/24 Volts DC, don't exceed.
Shorting output wires my cause injury to rheostat.
For indoor use solely - this product isn't waterproof or weatherproof.
continually observe correct polarity once connecting power and cargo.
Note
fast and SLOW speed buttons can solely work once unit is in one in every of the colour ever-changing (dynamic) modes. don't exceed eightieth of Power provide capability once calculating Power Supply size to use in your system.
Connect in step with the Wiring diagram.
Package as well as
1x T300K light-emitting diode Controller
1x AC transmission line
1x Piece of User's Manual
1x Piece of Coyote State Card (2G)
1x Coyote State Card as well as 2013 LedEdit software system
0 Comments
Hi Hello If you have any doubts let us know our fellow send me message